BENEFITS Good highly economical special purpose metal working fluid High oil content Stable long life emulsion Extended sump life Low foaming characteristics Reduces down time Ensures excellent machining of aluminium & aluminium alloys Effective corrosion inhibitors package ensures no rust or corrosion of tools, components or machine Eco-friendly, does not contain any ozone depleting substances or chlorinated, sulphurized or phosphorous EP additives, sodium nitrite, phenolic couplers, nonyl phenol, np ethoxylates, silicone oil and polysiloxane defoamers, coloring dyes etc Material Compatibility: SmoothKut SS 5300-AL is compatible with most ferrous alloys, aluminium, aerospace and automotive grades of aluminium alloys. Oil resistant polymers and other non metallic materials Water Compatibility: Suitable for low to high hardness water quality typically 50 to 400 ppm of calcium carbonates. Product designed for low and high pressure CNC systems APPLICATIONS Typical applications with water dilution ratios are: General Machining : 1:16 to 1:20 Deep Drilling & boring Operations : 1:12 to 1:16 Thread Cutting & forming : 1:12 to 1:16 Reaming including mapal reaming : 1:10 to 1:12 Grinding : 1:20 to 1:30 Guidelines of Use Suggested dilution ratios may vary marginally depending upon the severity of the operations, water hardness and work piece material Sump should be thoroughly cleaned before charging Concentration levels should be checked periodically and maintained Recommended to add oil to water and not vice versa. Do not add oil directly to the sump Make a solution before adding For additional information refer Coolant Management Guidelines available with Molygraph® Regional Application / Service Engineers